House Painting Fremont: Exterior Painting Preparation

Exterior house painting in Fremont can be the most difficult and demanding job to do if you’re not comfortable painting. You probably need to cover the whole house, not only in paint (which is difficult already) but also in preparing the surface. You may even encounter unexpected weather changes and spend much of your time inside your house.

Like in all painting projects, good preparation is a key to a successful finish, and this is especially true for exterior house painting Fremont. Since the exterior surface basically protects your home, taking these painting preparation tips will help make the surfaces look as good as new, as well as strong and long-lasting.

  • Does the entire home need to be painted? It is helpful to determine if you need to paint the whole exterior or parts such as the trim, shutters, and gables. This may depend upon your preferences, but if there is damage to the paint, it will determine the extent of painting that is needed.
  • Decide which color to use. If you are uncertain the color you’d like to repaint the home with, get some paint samples or purchase small amounts of your preferred colors. Create bigger samples of the paint color by painting a poster board. Use that to help you see how the paint will look at the different locations around your home.
  • Look in sample books or home magazines to help you with in choosing the paint color for the home’s exterior. The Internet may also be helpful to browse house and paint options. There are even some visualizing tools to help you preview your home with the paint color you’ve picked as if it were actually painted. Before finally deciding to buy paint, pay attention to the other homes in your area. You would like your home to harmonize with your neighbors’ houses.
  • It’s necessary to clean and prepare the surface for better paint adhesion. If your home is easy to clean, you may only need a water hose, brush, and cleaning solvent. It’s recommended to buy only detergents that are specially formulated for cleaning exterior surfaces.

    On the other hand, if your house shows extensive peeling or paint damage, you may need to use a pressure washer. But be careful when using the nozzle, because the stream of water coming out could damage the wood, and even the windows. There’s also a chance water could seep under the siding of the house, so a little caution is necessary when using this tool.

  • Make sure downspouts, gutters, and eaves are not problem areas for the surface by dripping on the exterior. After cleaning and washing, thoroughly rinse the surface of the house.
  • Scrape away remaining loose paint in areas where the power washing didn’t remove the paint entirely.
  • If you find any surface problems such as nail grooves, cracks, or holes, use putty and caulk to cover them. If the windows are badly damaged, repair and re-apply the epoxy putty before painting. If you see areas that need to have old caulk removed, do that as soon as you can. Then apply new caulk over the specific area.

    Also, primer may be needed where the paint has peeled off, become thin, or has blistered. Apply primer to any bare wood that you come across before administering the caulk.

  • Cover flower beds or bushes with drop cloths to protect them when you begin painting. It’s recommended to use canvas drop cloths over plastic ones for safety reasons.

Once these tasks are complete, you can begin painting!

Following these steps while doing exterior house painting in Fremont will ensure you of a home that will look as good as new!

Painters Concord – Pros and Cons of Latex or Oil-Based Paint

Painters Concord – Pros and Cons of Latex or Oil-Based PaintOne of the first questions people ask when starting a painting in Concord project is what type of paint to use – latex or oil-based. Latex paint is water-based, and oil-based is self-explanatory. Choosing which paint to use may not be an easy choice since each type of paint has its good points and its bad points.

Many people choose oil-based paints because of its many advantages. One coat is usually all you need because it adheres and bonds to nearly any type of surface. The length of time it takes to dry allows it to produce a smooth finish. Weather conditions do not have to be perfect because water does not affect it. It generally has a semi-gloss or high gloss finish and holds up well in high-traffic areas. It is resistant to mildew.

It also has several potential disadvantages. It will require chemicals to clean up because it is oil-based. You also have to dispose of remaining paint and rags used to clean up as hazardous material. Its strong smell requires proper ventilation. It can take 24 hours or more to dry depending upon the conditions. It can yellow over time; this possibility may change what color you choose. It also develops chips and cracks leading to peeling paint or flaking because the paint becomes brittle as time passes.

Latex is a newer paint and has quickly become a favorite among painters in Concord. Water-based paint is easier to clean than oil-based paints. As long as you have soap and water, clean up is a breeze. The smell is not as strong as oil-based paint but you will still want to have good ventilation. Latex does not yellow and retains its original color well. It is easier on the environment and is non-flammable. It dries quickly to the touch and can be used on a number of surfaces. If money is a concern, it also costs less than oil-based paints.

Latex paint is not without its disadvantages. It does not stick well to surfaces that had been painted with oil-based paints; however there are new acrylic binders that can be used to alleviate this problem. It does not have a shiny finish like oil-based paints. It dries quickly, which can be an advantage, unless you want to clean up errors are want a smooth finish. Painting latex paint on wood makes the wood swell. You will want to sand between coats for the best results. The weather must be clear when you use latex paint outdoors. A primer is needed when using latex and it will likely require several coats to achieve the coverage you want.

When you hire painters in Concord, ask them which type of paint they will use. Let them know of your preference especially if you are painting over a darker color or you want a particular finish.

Learn How to Prepare for Exterior Painting in San Ramon

Learn How to Prepare for Exterior Painting in San Ramon

When you’re planning to make a change to the exterior of your building, consider how time consuming and difficult it may be. The experts at Custom Painting, Inc. are available to do the job for you.

The steps you take to prepare for exterior painting in Danville can pay off in the end. It will make the painting process take less time. Putting in your own efforts can also help to reduce the cost of the project.

Changing the exterior of your building will help improve the curb appeal of your location. A strong curb appeal can draw in new customers or clients. It can also help to entice buyers if you decide to sell. The staff at Custom Painting, Inc. has the experience and knowledge you need to create a strong plan for maximizing your curb appeal and making the most of your exterior painting investment.

Preparing for Exterior Painting in Danville

Clearing the way – remove all of the items that normal sit around the foundation of a building. Pick up and move the garden hose or feeders that you normally leave sitting around for convenience. The painting crew will appreciate having a clear work space and you will appreciate that they do not spend the time you are paying them picking up instead of painting.

Protecting the landscaping – the plants you have around your foundation will not appreciate the foot traffic of the painting crew. The dripping paint or cleaning supplies used to prepare the walls may also stress out the plants. Take some time to cover them with heavy drop cloths on the mornings when work will be done. Be sure to remove the drop cloths during the times when the crew will not be working or the lack of sun may end up stressing them even more.

Put your elbow grease to work – clean off the surfaces of the walls with a pressure washer. Removing the grime and dirt will give the paint a good foundation to make it adhere better. You may also want to use a sander to remove chipping paint or smooth out rough spots. It will need to be done to get a clean finish and anything that you do not do the crew will have to complete before painting can begin.

Talk with your painting contractor to see what steps will make it easier for the painting crew. The time and energy you invest into preparing the location can add up to savings. The changes you make through exterior painting in Danville will serve to increase the value of the property through a stronger curb appeal.